Comtech EF Data LPOD-R PS .5, Инструкция по установке и эксплуатации

Страница: 125 / 152

LPOD-R Outdoor Amplifier / Block Up Converter (BUC) MN-LPODR
Optional Serial Interface Operation (PS 1, PS 1.5 ONLY) Revision 3
5–21
Parameter Type
(* indicates
End-of-Life)
Controller-to-Target
Instruction Code and
Qualifier
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
(see Description of Arguments)
Command Query
Response to
Command
Response to
Query
Retrieve Next 5
unread stored
Events
N/A RNE? 75 bytes Query only.
Returns the oldest 5 Stored Events that have not yet been read over the remote interface, in the form {CR}Sub-
body{CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}Sub-body, where Sub-body is in the form
ABCCddmmyyhhmmss:
A=Fault/clear indicator: F = Fault; C = Clear; I = Info
B=Fault type: 1 = Unit; 2 = RF; 3 = Log
CC=Fault Code numbers, as in RAS? or Info Codes:
RAS FAULT CODES MAP AS FOLLOWS:
1) P24V1
2) P13VT
3) A10V1
4) A10VPS
5) P5V8T
6) P2V5T
7) P1V2T
8) N5V8T
9) P7V8T
10) FANR1
11) FANR2 (PS 1.5 ONLY)
12) ATEMP
13) SHTDN
14) IICST
15) FWPWR
16) CHKSM
17) FPGAD
18) BUCLD (ONLY WHEN BUC OPTION INSTALLED)
INFO CODES REPORT AS FOLLOWS:
0=Power Off; 1 = Power On; 2=Log Cleared; 3=Global Config Change; 4=Redundancy Config Change
ddmmyy=Date in day/month/year format
hhmmss=Time in hour:minutes:seconds format
NOTES:
1) If less than 5 events are retrieved, the remaining positions are padded with zeros.
2) If there are no new events, the response is RNE*.
3) A Global Config Change is defined as any time a command is successfully executed.
4) A query does not set the status change flag. The status change flag is cleared after being read. No other
events toggle a status change.
RNE= RNE={CR}ABCC
ddmmyyhhmm
ss{CR}ABCCdd
mmyyhhmmss{
CR}ABCCddmm
yyhhmmss{CR}
ABCCddmmyyh
hmmss{CR}ABC
Cddmmyyhhm
mss