Comtech EF Data LPOD-R PS .5, Инструкция по установке и эксплуатации

Страница: 70 / 152

LPOD-R Outdoor Amplifier / Block Up Converter (BUC) MN-LPODR
Firmware Update Revision 3
3–6
If needed, see Section 2.4.3 in Chapter 2. SYSTEM
CONNECTORS, INSTALLATION,
AND
STARTUP in this manual to
execute the LPOD-R User Interface Access recovery procedure.
3. Get the firmware information using either of these methods:
•
To use the HTTP (Web Server) Interface, see Section 3.2.3.1.
•
To use the optional serial remote control, see Section 3.2.3.2.
3.2.3.1 Use the HTTP Interface to Find the Firmware Information
Chapter 4. ETHERNET INTERFACE OPERATION
Do these steps:
1. Go to one of these pages to review the firmware information:
•
The ‘Firmware Information’ section of the ‘Config | Utility’ page
provides the firmware details as Boot, Bulk1, and Bulk2, as shown
in this example:
•
The ‘Summary’ section of the ‘Status | Summary’ page provides
the firmware details as “FW Revision”, “Active Software Image”,
and “Next Reboot Image”, as shown in this example:
2. Write down your firmware information for further reference or to provide
to Comtech EF Data Product support.