Comtech EF Data LPOD-R PS .5, Инструкция по установке и эксплуатации

Страница: 84 / 152

LPOD-R Outdoor Amplifier / Block Up Converter MN-LPODR
Ethernet Interface Operation Revision 3
4–4
For correct SNMP operation, the LPOD-R MIB files must be used with the
associated version of the LPOD-R M&C. See the LPOD-R FW Release
Notes for information on the required FW/SW compatibility.
4.3 Telnet Interface
Chapter 5. OPTIONAL SERIAL INTERFACE OPERATION (PS 1, PS
1.5 ONLY)
The LPOD-R has a Telnet interface for the purpose of equipment M&C via the
optional Serial Remote Control protocol. The Telnet interface requires user login
at the Administrator level and Read/Write level. Once logged into the Telnet
interface as the Administrator, you have access to the optional serial-based
Remote Control Interface. An example of the login process and remote control
operation is shown here:
Figure 4-1. Telnet Interface Example – Windows Command-line
4.3.1 Using HyperTerminal for Telnet Remote Control Operation
There is a disadvantage when using Windows Command line as a Telnet client
with the optional Remote Control protocol. For the messages coming from the
Telnet Server, Command line cannot translate a carriage return command ( \r ) to
a carriage line feed command ( \r\n ). Therefore, any multi-line Target-
to-Controller response (e.g., the response to the FRW? query) shows as one line,
with the latter lines overwriting the previous lines.