Comtech EF Data LPOD-R PS .5, Инструкция по установке и эксплуатации

Страница: 127 / 152

LPOD-R Outdoor Amplifier / Block Up Converter (BUC) MN-LPODR
Optional Serial Interface Operation (PS 1, PS 1.5 ONLY) Revision 3
5–23
Parameter Type
(* indicates
End-of-Life)
Controller-to-Target
Instruction Code and
Qualifier
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
(see Description of Arguments)
Command Query
Response to
Command
Response to
Query
SNMP Enable SNM= SNM? 1 byte Command or Query.
Sets or returns SNMP in the form x, where:
0 = Disabled
1 = Enabled
COMMAND EXAMPLE:
<0001/SNM=0{CR}
SNM=
SNM?
SNM=x
Serial Number* N/A SNO? 9 bytes Query only.
Returns the unit’s nine-digit serial number in the form xxxxxxxxx.
NOTE: This query is functionally identical to RSN.
EXAMPLE: <0001/SNO?{CR}
>0001/SNO=012345678{CR}{LF}
SNO= SNO=xxxxxxxxx
Set Physical
(remote) Address
SPA= SPA? 4 bytes Command or Query.
Sets or returns the Physical Address in the form xxxx where:
xxxx = Address value from 0001 ( DEFAULT ) to 9999.
COMMAND EXAMPLE: <0001/SPA=0412{CR}
SPA=
SPA?
SPA*
SPA=xxxx
SNMP Read
Community
SRC= SRC? 16 bytes,
characters, no
spaces
Command or Query.
Sets or returns the SNMP Read Community string.
NOTE: An empty string is not allowed.
COMMAND EXAMPLE: <0001/SRC=public{CR}
SRC =
SRC!
SRC=x
SNMP System
Contact
SSC= SSC? 255 bytes,
characters,
Command or Query.
Sets or returns the SNMP System Contact string.
COMMAND EXAMPLE: <0001/SSC=Joe Net Admin{CR}
NOTE: When not configured, the Target returns an empty string: <0001/SSC={CR}{LF}
SSC =
SSC!
SSC=x [1..128]
Set Statistics
Interval
SSI= SSI? 2 bytes Command or Query.
Sets or returns the time interval, in minutes, at which statistics are logged in the form xx, where:
xx = interval, from 01 to 99 minutes (see NOTE)
NOTE: Default value is 90 minutes.
COMMAN D EXAMPLE:
<0001/SSI=90{CR}
SSI=
SSI?
SSI=xx
SNMP System
Location
SSL= SSL? 255 bytes,
characters,
Command or Query.
Sets or returns the SNMP System Location string.
COMMAND EXAMPLE: <0001/SSL=Upstairs back right.
NOTE: When not configured, the Target returns an empty string. <0001/SSL={CR}{LF}
SSL =
SSL!
SSL=x[1..128]
SNMP Unit Name SSN= SSN? 16 bytes,
characters,
Command or Query.
Sets or returns the SNMP Unit Name string.
COMMAND EXAMPLE: <0001/SSN=Remote1{CR}
NOTE: When not configured, the Target returns an empty string. <0001/SSC={CR}{LF}
SSN =
SSN!
SSN=x[1..128]
SNMP Trap
Destination IP
Address 1
STA= STA? 15 bytes,
Numerical
Command or Query.
Sets or returns the IP Address of the SNMP Trap Destination IP Address 1 (where
traps will be sent first) in the form xxx.xxx.xxx.xxx, where:
xxx.xxx.xxx.xxx = IP Address
COMMAND EXAMPLE: <0001/STA=010.006.030.001{CR}
NOTE: When not configured, the Target returns >0001/STA=0.0.0.0{CR}{LF}
STA =
STA!
STA=xxx.xxx.xx
x.xxx