Comtech EF Data LPOD-R PS .5, Инструкция по установке и эксплуатации

Страница: 94 / 152

LPOD-R Outdoor Amplifier / Block Up Converter MN-LPODR
Ethernet Interface Operation Revision 3
4–14
4.5.2.2 Admin | SNMP
The Administrator must use this page to manage LPOD-R SNMP (Simple Network
Management Protocol) settings. Refresh the page to see the latest data.
Figure 4-8. Admin | SNMP Page
•
Simple Network Management – Use the drop-down list to select Enabled
or Disabled.
•
The Read Community String and Write Community String fields can be
any combination of characters and a length of 0 to 20 characters.
o
Read Community String factory default is “public”.
o
Write Community String factory default is “private”.
• SNMP Contact – Enter the contact data.
• SNMP Name
– Enter the name.
• SNMP Location – Enter the location.
• Enable Authentication Trap – Use the drop-down list to select Enabled or
Disabled.
• The Administrator can assign up to two SNMP Trap IP Addresses .
•
Trap Version – Use the drop-down list to select the version.
•
The SNMP Trap Community String field can be any combination of
characters and a length of 0 to 20 characters. The factory default for the
SNMP Trap Community String is “comtech”.
Click Submit SNMP to save any changes.