Comtech EF Data LPOD-R PS .5, Инструкция по установке и эксплуатации

Страница: 124 / 152

LPOD-R Outdoor Amplifier / Block Up Converter (BUC) MN-LPODR
Optional Serial Interface Operation (PS 1, PS 1.5 ONLY) Revision 3
5–20
Parameter Type
(* indicates
End-of-Life)
Controller-to-Target
Instruction Code and
Qualifier
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
(see Description of Arguments)
Command Query
Response to
Command
Response to
Query
Retrieve
Maintenance
Status
N/A RMS? 213 bytes, alpha-
numeric
Query only.
Returns the Maintenance status of the unit in detailed format, where:
P24V1 = +24V power supply
P24V2 = +24V switch power supply (NOT USED)
LNBVT = +13/18V LNB power supply (NOT USED)
P13VT = +13.5V power supply
P10V1 = +10V1 power supply
A10V1 = +10V1 on RF Module
A10V2 = +10V2 on RF Module (NOT USED)
P7V8T = +7.8V power supply
P5V8T = +5.8V power supply
P2V5T = +2.5V power supply
N1V2T = -1.2V power supply
N5V8T = -5.8V power supply
FANR1 = Fan 1 speed in percent
FANR2 = Fan 2 speed in percent (PS 1.5 ONLY)
BUCVT = BUC tuning voltage (SEE NOTE)
FWPWR = Forward power in dBm
REFVT = Reference osc. tuning voltage (NOT USED)
LNBCS = LNB current supply in mA (NOT USED)
ATEMP = Heatsink temperature in Celsius
OTEMP = Outside temperature in Celsius (PS 1.5 ONLY)
EXAMPLE: <0001/RMS?{CR}
>0001/RMS={CR}
P24V1 = 024.1{CR}
P24V2=XXXXX{CR} (NOT USED)
LNBVT=XXXXX{CR} (NOT USED)
P13VT=013.4{CR}
P10V1 = 010.1{CR}
A10V1 = 010.1{CR}
A10V2=XXXXX{CR} (NOT USED)
P7V8T=007.8{CR}
P2V5T=002.5{CR}
P1V2T=001.2{CR}
N5V8T=-05.9{CR}
FANR1 = 100.0{CR}
FANR2=100.0{CR} (PS 1.5 ONLY)
BUCVT=008.3{CR} (VALID ONLY WHEN BUC OPTION INSTALLED – OTHERWISE “XXXXX”)
FWPWR=+53.2{CR}
REFVT=XXXXX{CR} (NOT USED)
LNBCS=XXXXX{CR} (NOT USED)
ATEMP=+40.0{CR}
OTEMP=+30.0{CR} (PS 1.5 ONLY)
RMS= RMS=x….x