Comtech EF Data CDM-625, Инструкция по установке и эксплуатации

Страница: 167 / 322

CDM-625 Advanced Satellite Modem Revision 1
Ethernet Management MN-0000036 (Ref MN/CDM625.IOM)
6.5.4.3.6 Config | BUC (Block Up Converter)
Figure 6-11. Config | BUC page
The ‘
Config | BUC
’ page (
Figure 6-11)
is used to configure Block Up Converter parameters, and
display the BUC status for L-Band operation.
BUC Configuration
•
BUC Power Enable
,
10 MHz Ref Enable
, and
Output Power Enable
may be turned
ON
or
OFF
.
• The user may assign
BUC Low
and
High Current Limit
values ranging from 0 to 4000
mA.
• The user may assign the
Tx Lockout Frequency
and designate the value as a
HIGH (+)
or
LOW (-)
limit.
• The user may assign a
BUC Address
of
0
to
15
.
BUC Status
The parameters shown here are
read-only
and cannot be changed.
Once the desired configuration settings have been made on this page, the user should then click
[Submit BUC Controls]
as needed to save those changes.
6–19