Comtech EF Data CDM-625, Инструкция по установке и эксплуатации

Страница: 290 / 322

CDM-625 Advanced Satellite Modem Revision 1
Remote Control MN-0000036 (Ref MN/CDM625.IOM)
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction
& Qualifier)
Response to Query
Retrieve next
5 unread
Stored Events N/A 80 bytes
Query only.
Unit returns the oldest 5 Stored Events which have not yet been
read over the remote control.
Reply format: [CR]sub-body[CR]sub-body[CR]sub-body[CR]sub-
body[CR]sub-body, where Sub-body=ABCddmmyyhhmmss,
A is the fault/clear indicator:
F=Fault
C=Clear
I=Info
B is the fault type where:
1=Unit
2=Rx Traffic
3=Tx Traffic
4=Info (Power on/off, or log cleared)
5=Open Network
6=BUC
7=LNB
C is Fault Code number, as in FLT? or Info Code, which may be:
0=Power Off
1=Power On
2=Log Cleared
3=Global Config Change
4=Redundancy Config Change
ddmmyy = date stamp.
hhmmss = time stamp.
If there are less than 5 events to be retrieved, the remaining
positions are padded with zeros. If there are no new events, the
response is RNE*.
N/A RNE? RNE=[CR]ABCddmmy
yhhmmss[CR]ABCddm
myyhhmmss[CR]ABCd
dmmyyhhmmss[CR]AB
Cddmmyyhhmmss[CR]
ABCddmmyyhhmmss
(see description for
details of arguments)
Clear All
Stored Events CAE= None Command only.
Forces the software to clear the software events log.
Example: CAE=
Note:
This command takes no arguments
CAE=
CAE?
CAE*
CAE# N/A N/A
Initialize the
Stored Events
Pointer IEP= None Command only.
Resets internal pointer to allow RNE? queries to start at the
beginning of the stored events log.
IEP=
IEP# N/A N/A
D–30