Comtech EF Data CDM-625, Инструкция по установке и эксплуатации

Страница: 151 / 322

CDM-625 Advanced Satellite Modem Revision 1
Ethernet Management MN-0000036 (Ref MN/CDM625.IOM)
6.3.3 SNMP Traps
The modem has the ability to send out SNMP traps when certain events occur in the modem. The
modem sends out traps when an alarm or a fault occurs in the modem. These include unit faults, TX
faults, RX faults, and ODU faults. A trap is sent both when a fault occurs and is cleared.
The modem supports both
SNMPv1
traps and
SNMPv2
notifications. Which style of traps the
modem sends can be configured by the user using the CDM625SNMPTrapVersion OID.
The following are the MIB2 v1traps/v2 notifications that the modem supports:
MIB2 SNMPv1 trap: Authentication Failure 5
MIB2 SNMPv2 notifications: Authentication Failure 1.3.6.1.6.3.1.1.5.5
The following tables are the Alarms and Faults v1 traps / v2 notifications that the modem supports.
Alarms and Faults
SNMPv1
traps:
cdm625UnitAlarmV1 6247641
cdm625TxTrafficAlarmV1 6247642
cdm625RxTrafficAlarmV1 6247643
cdm625OpenNetworkAlarmV1 6247644
cdm625BUCAlarmV1 6247645
cdm625LNBAlarmV1 6247646
Alarms and Faults
SNMPv2
notifications:
cdm625UnitAlarm 1.3.6.1.4.1.6247.34.2.0.1
cdm625TxTrafficAlarm 1.3.6.1.4.1.6247.34.2.0.2
cdm625RxTrafficAlarm 1.3.6.1.4.1.6247.34.2.0.3
cdm625OpenNetworkAlarm 1.3.6.1.4.1.6247.34.2.0.4
cdm625BUCAlarm 1.3.6.1.4.1.6247.34.2.0.5
cdm625LNBAlarm 1.3.6.1.4.1.6247.34.2.0.6
6–3