Comtech EF Data CDM-625, Инструкция по установке и эксплуатации

Страница: 288 / 322

CDM-625 Advanced Satellite Modem Revision 1
Remote Control MN-0000036 (Ref MN/CDM625.IOM)
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction
& Qualifier)
Response to Query
Warm-up
Delay WRM= 1 byte, 0 or 1
Command or Query. (Hi-stab Ref parameter)
0= Delay off (instant on)
1= Warm-up Delay on
WRM=
WRM?
WRM*
WRM# WRM? WRM=x
(see description of
arguments)
Countdown of
Warm-up
Delay
remaining CTD= 3 bytes,
numeric
Command or Query. (Hi-stab Ref parameter)
xxx = countdown of the number of seconds remaining of the Warm-
up time.
As a command, the only permitted format is CTD=000, which
abandons the delay.
CTD=
CTD?
CTD*
CTD# CTD? CTD=xxx
(see description of
arguments)
Unit Test
Mode TST= 1 byte, value
of 0 thru 6
Command or Query.
Unit Test Mode, where:
0=Normal Mode (no test)
1=Tx CW
2=Tx Alternating 1,0 Pattern
3=IF Loopback
4=RF Loopback
5=Digital Loopback
6=I/O Loopback
Example: TST=3 (IF Loopback)
TST=
TST?
TST*
TST# TST? TST=x
(see description of
arguments)
D–28