Comtech EF Data CDM-625, Инструкция по установке и эксплуатации

Страница: 302 / 322

CDM-625 Advanced Satellite Modem Revision 1
Remote Control MN-0000036 (Ref MN/CDM625.IOM)
D–42
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
Configuration
Save CST= 1 byte, value of 0
thru 9 Command only.
Command causes the modem to store the current modem
configuration in Configuration Memory location defined by the
one-byte argument (0 to 9).
Example: CST=4 (store the current configuration in location 4) CST=
CST?
CST*
CST# N/A N/A
Configuration
Load CLD= 1 byte, value of 0
thru 9 Command only.
Causes the modem to retrieve a previously stored modem
configuration from Configuration Memory location defined by the
one-byte argument (0 to 9).
Example: CLD=4 (load modem configuration from location 4 to be
the active configuration) CLD=
CLD?
CLD*
CLD# N/A N/A
Bulk Status
Query N/A 29 bytes
*
Exception:
600/L
28 chars, as RFO
is different
Query only.
The response has the format:
abcccc,ddddd,eefffffggggghhh,
where:
a is as LRS? response
b is as RED? response
cccc is as EBN? response
ddddd is as BER? response
eeeee is as BFS? response
ffffff is as RFO? response
ggggg is as RSL? response
hhh is as TMP? response
This command is intended to reduce the need for excessively
frequent queries to a modem, and will be useful for a unit in a
redundancy system, where the redundancy system has
monitoring of its own occurring. The latter 6 parameters are only
updated once per second.
N/A BSQ? BSQ=abcccc,ddddd,ee
ffffffggggghhh
(see description of
arguments)