Comtech EF Data CDM-625, Инструкция по установке и эксплуатации

Страница: 275 / 322

CDM-625 Advanced Satellite Modem Revision 1
Remote Control MN-0000036 (Ref MN/CDM625.IOM)
D–15
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction
& Qualifier)
Response to Query
Transmit
ESC Type TET= 1 byte, 0 or 1
Command or Query. (IDR parameter)
IDR ESC Type, where:
0=64k data channel
1=2 Audio channels
TET=
TET?
TET*
TET# TET? TET=x
(see description of
arguments
Tx Drop
Timeslot DTS= 3 bytes
Command or Query. (Drop parameter)
(Note different format between command and query.)
Command format: DTS=xxy
Where xx = Channel 01 through 24
y = timeslot: 0-9, A=10, B=11, C=12, D=13,…V=31
DTS=
DTS?
DTS*
DTS# DTS? DTS=yyyyyyyyyyyyyyy
yyyyyyyyy
indicating all 24 Drop
timeslots values
associated with the 24
Tx Satellite channels.
TX LO
Frequency TLO= 6 bytes Command or Query.
Tx LO frequency information in the form: xxxxxs, where:
xxxxx is the LO frequency,
3000 through 65000 MHz or
00000 (OFF)
s is the sign for the MIX
Note: For additional information, refer to Chapter 17. LO, MIX, and
Spectrum Settings.
Terminal Frequency = LO
±
TFQ (see below)
TLO=
TLO?
TLO*
TLO# TLO? TLO=xxxxxs
(see description of
arguments)
Tx Satellite
(Terminal)
Frequency
N/A 10 bytes Query only.
Terminal (aka satellite) Tx Frequency, which is the frequency
transmitted to the satellite.
Resolution=100 Hz
Returns 00000.0000 if LO is zero
Example: TTF=11650.2249
N/A TTF? TTF=xxxxx.xxxx
(see description of
arguments)