Comtech EF Data CDM-625, Инструкция по установке и эксплуатации

Страница: 131 / 322

CDM-625 Advanced Satellite Modem Revision 1
Front Panel Operation MN-0000036 (Ref MN/CDM625.IOM)
5.9.5 Utilities: 1:N
1:N communications:
Enabled (Enable,Disable) (
v
)
If the unit is attached to a CRS-300 switch as part of a 1:N system, it needs to be configured for
1:N communication.
5.9.6 Utilities: Circuit ID
Edit this Modem’s Circuit ID: (
34v
)
----------------------------------------
This menu allow the user to enter a Circuit ID string. Only the bottom line is available (40
characters). Use the
◄ ► arrow keys to position the cursor on to the character to be edited, then
edit the character using
▲ ▼
arrow keys. The following characters are available:
Space ( ) * + - , . / 0-9 and A-Z.
When the user has composed the string, press
ENTER
.
5.9.7 Utilities: Firmware
IMPORTANT
THESE MENUS ARE FOR DIAGNOSTIC PURPOSES. ONLY CHANGE AN IMAGE
IF INSTRUCTED TO DO SO BY A COMTECH EF DATA CUSTOMER SUPPORT
TECHNICIAN.
This series of submenus permits the user to view information about the CDM-625 internal
firmware. The modem can store two complete firmware images, and the user can select which
image will be loaded the next time the unit reboots.
Firmware Images:
Info Select (
34
)
Select
Info
or
Select
using the ◄ ► arrow keys, then press
ENTER
.
5.9.7.1 Utilities: Firmware
Æ
Info
Firmware Information:
Boot-ROM Image#1 Image#2 (
34
)
Use the ◄ ► arrow keys and
ENTER
key to select and view information about the Bootrom, the
two firmware images, e.g.:
5–59