Comtech EF Data CDM-625, Инструкция по установке и эксплуатации

Страница: 271 / 322

CDM-625 Advanced Satellite Modem Revision 1
Remote Control MN-0000036 (Ref MN/CDM625.IOM)
D–11
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction
& Qualifier)
Response to Query
Tx Spectrum
Invert TSI= 1 byte, 0 or 1
Command or Query.
Tx Spectrum Invert selection, where:
0=Normal
1=Tx Spectrum Inverted
Example: TSI=0 (which is normal)
TSI=
TSI?
TSI*
TSI# TSI? TSI=x
(see description of
arguments)
Tx Scrambler TSC= 1 byte, 0, 1 or 2 Command or Query.
Tx Scrambler state, where:
0=Off
1=Normal
2=IESS-315 when in Turbo mode
Example: TSC=1 (Scrambler On)
TSC=
TSC?
TSC*
TSC# TSC? TSC=x
(see description of
arguments)
Tx Power
Level TPL= 4 bytes
Command or Query.
Tx Output power level between 0 and -40 dBm (minus sign
assumed) for 950 to 1950MHz range.
Tx Output power level between 0 and -25 dBm (minus sign
assumed) for 50 to 180MHz range.
Example: TPL=13.4
In AUPC mode, command is not valid. Response will be TPL*.
When the external 20 dB attenuator is activated (via AUP), the
permitted power level range shifted down by 20dB.
Example: –65 and -20 dBm.
600 emulation:
Level range: 0 to -20 dBm (minus sign assumed).
600L emulation:
Level range: 0 to -45 dBm (minus sign assumed).
TPL=
TPL?
TPL*
TPL# TPL?
TPL=xx.x
(see description of
arguments)