Comtech EF Data CDM-625, Инструкция по установке и эксплуатации

Страница: 100 / 322

CDM-625 Advanced Satellite Modem Revision 1
Front Panel Operation MN-0000036 (Ref MN/CDM625.IOM)
5.4.7 CONFIG: Quad Drop & Insert (QDI)
Quad D&I (QDI):
Drop Insert (
34
)
Select
Drop
or
Insert
using the ◄ ► arrow keys, then press
ENTER
.
5.4.7.1 CONFIG: Quad D&I
Æ
Drop
QDI Port[ch]: Drop: 01536 kbps
1[09] 2[15] 3[00] 4[00] (
34v
)
This submenu shows information for all four ports of the Drop side and the cumulative Tx data
rate. Each port may be allocated between 0 and 32 channels, accumulating to no less than one
channel and no more than 32 channels. Select the port to edit using the
◄ ►
arrow keys, then
edit the number of channels for that port using the
▲ ▼
arrow keys. The cumulative data rate is
calculated & displayed as the number of channels is edited. After pressing
ENTER
, a submenu
appears based on the port that the cursor had been on (where #X is the tributary port number):
QDI Drp-Ch: 1 2 3 4 5 6 7 8 >
Port#X TS: 01 02 03 04 11 12 13 14
The display can only show up to 8 channels. If a
>
character is displayed at the top right-hand
side, this means that there are more channels to view (beyond channel 8 as in this example). Use
the
► arrow key to scroll across and view more.
Select a timeslot using the
◄ ► arrow keys. Edit the timeslot value using the
▲ ▼
arrow keys,
then press
ENTER
when done.
5.4.7.2 CONFIG: Quad D&I
Æ
Insert
QDI Port[ch]: Insert: 01536 kbps
1[09] 2[15] 3[00] 4[00] (
34v
)
This submenu shows information for all four ports of the Insert side and the cumulative Rx data
rate. Each port may be allocated between 0 and 32 channels, accumulating to no less than one
channel and no more than 32 channels. Select the port to edit using the
◄ ►
arrow keys. Edit the
number of channels for that port using the
▲ ▼
arrow keys. The cumulative data rate is
calculated & displayed.
After pressing
ENTER
, a submenu will appear, based on the port that the cursor had been on
(where #X is the tributary port number):
5–28