Comtech EF Data CDM-625, Инструкция по установке и эксплуатации

Страница: 209 / 322

CDM-625 Advanced Satellite Modem Revision 1
Automatic Uplink Power Control (AUPC) MN-0000036 (Ref MN/CDM625.IOM)
8.2.3 Alarm
This parameter defines how the user wants the modem to act if, under AUPC control, the maximum
power limit is reached.
The two choices are:
•
NONE
(no action)
•
TX ALARM
(generate a TX alarm)
The default setting is
NONE
.
8.2.4 Demod Unlock
This defines the action the modem will take if the remote demodulator loses lock.
The two choices are:
•
NOMINAL
(reduce the TX Output Power to the nominal value)
•
MAXIMUM
(increase the TX Output Power to the maximum value permitted by the
parameter
MAX RANGE
)
The default setting is
NOMINAL
.
Note:
If the local demod loses lock, the modem will automatically move its output power to the
nominal value.
8.3 Compensation Rate
As with any closed-loop control system, the loop parameters must be chosen to ensure stability at
all times. Several features have been incorporated to ensure that the AUPC system does
overshoot, or oscillate.
• First, the rate at which corrections to the output power can be made is fixed at once every
4 seconds. This takes into account the round trip delay over the satellite link, the time
taken for a power change to be reflected in the remote demodulator’s value of Eb/No, and
other processing delays in the modems.
• Second, if the comparison of actual and target Eb/No yields a result that requires a
change in output power, the first correction made will be 80% of the calculated step. This
avoids the possibility of overshoot. Subsequent corrections are made until the difference
is less than 0.5 dB. At this point, the output power is only changed in increments of 0.1
dB, to avoid ‘hunting’ around the correct set point.
8–3