Comtech EF Data CDM-625, Инструкция по установке и эксплуатации

Страница: 136 / 322

CDM-625 Advanced Satellite Modem Revision 1
Front Panel Operation MN-0000036 (Ref MN/CDM625.IOM)
Use the ◄ ► arrow keys to move the cursor to the ODU type, and edit it from the selection
available using the
▲ ▼
arrow keys. Then press
ENTER
. The modem will then attempt to
communicate with the ODU.
5.10.4 ODU: FSK-control
Æ
BUC
BUC controls via FSK:
Configuration Status (
34
)
Use the ◄ ► arrow keys and
ENTER
key to select the next menu.
5.10.5 ODU: FSK-control
Æ
BUC
Æ
Configuration
BUC: Tx:xxx (Off,On)
Addr:xx (1-15) (
34v
)
Use the ◄ ► arrow keys and
ENTER
key to select the next menu.
ODU: FSK-control
Æ
BUC
Æ
Status
BUC: Pwr=4.5watts Pclass=5 W
PLL=locked +45degC Ver=3
This menu is read-only information. Return to the previous menu by pressing
ENTER
or
CLEAR
.
5.10.6 ODU: FSK-control
Æ
2 CSATs
1:1 Monitor & Control
CSAT#1 CSAT#2 Redundancy-Box (
34
)
The user has specified 2 CSATs connected in a 1:1 redundancy system, connected via the Rx IF
and the ODU Redundancy Controller Box. Use the
◄ ► arrow keys and
ENTER
key to select
the next menu.
ODU: FSK-control
Æ
2 CSATs
Æ
Redundancy-Box
Red: Online: ODU2 Mode:Auto Switch:N
TxSw:ok RxSw:OK 5V:5.0 12V:12.0
This menu provides the capability to force a switchover to the other CSAT unit. Use the
◄ ►
arrow keys to move the cursor to
Switch: N
then, using the
▲ ▼
arrow keys, select
Y
(Yes) and
press
ENTER
.
5–64