3-27
Compaq Professional Workstation AP200 Maintenance and Service Guide
Processor Guide Rails
CAUTION: Static electricity can damage the electronic components of the
workstation. Before beginning these procedures, be sure you are discharged of
static electricity by briefly touching a grounded metal object.
To remove the processor guide rails:
CAUTION: Before removing the access panel, ensure that the workstation is
turned off, all cables are disconnected from the back of the workstation, and the
power cord is disconnected from the grounded AC outlet.
1.
Perform the service preparations shown on page 3-2.
2.
Remove the access panel.
3.
Remove the processor.
4.
Use a small flat-bladed screwdriver to lift and remove the four push tabs that attach the
processor guide rails to the system board, then remove the rails.
Figure 3-29. Removing the processor guide rails from the system board
To replace the processor guide rails, seat the guide rails flush with the system board, then press
in the push tabs to attach the rails to the system board.
