vi
Compaq Professional Workstation AP200 Maintenance and Service Guide
About This Guide
This Maintenance and Service Guide is a troubleshooting guide that can be used for reference
when servicing your Compaq Professional Workstation AP200.
WARNING: To reduce the risk of personal injury from electrical shock and
hazardous energy levels, only authorized service technicians should attempt to
repair this equipment. Improper repairs could create conditions that are
hazardous.
IMPORTANT: The installation of options and servicing of this product shall be performed
by individuals that are knowledgeable of the procedures, precautions, and hazards
associated with equipment containing hazardous energy circuits.
Compaq Technician Notes
WARNING: Only authorized technicians trained by Compaq should attempt to
repair this equipment. All troubleshooting and repair procedures are detailed to
allow only subassembly/module level repair. Because of the complexity of the
individual boards and subassemblies, no one should attempt to make repairs at
the component level or to make modifications to any printed wiring board.
Improper repairs can create a safety hazard. Any indications of component
replacement or printed wiring board modifications may void any warranty
WARNING: To reduce the risk of personal injury from electrical shock and
hazardous energy levels, do not exceed the level of repair specified in these
procedures. Because of the complexity of the individual boards and
subassemblies, do not attempt to make repairs at the component level or to make
modifications to any printed wiring board. Improper repairs could create conditions
that are hazardous
WARNING: To reduce the risk of electric shock or damage to the equipment:
■
Disconnect power from the computer by unplugging the
power cord from either the electrical outlet or the computer.
■
Do not disable the power cord grounding plug. The
grounding plug is an important safety feature.
■
Plug the AC adapter or power cord into a grounded (earthed)
electrical outlet that is easily accessible at all times
CAUTION: To properly ventilate your system, you must provide at least 6 inches
(15 cm) of clearance at the front of the workstation and 3 inches (7.6 cm) at the
back.
IMPORTANT: Any indication of repair at the component level or modification of a printed
wiring board may void any warranty.
