Index-6
printer
test error codes 4-25
printer problems, troubleshooting 4-11
problems
audio hardware 4-17
CD-ROM drive (IDE) 4-14
diskette drive 4-9
display 4-10
hard drive 4-12
hardware installation 4-13
memory 4-15
network 4-16
power 4-8
printer 4-11
SCSI 4-15
processor
spares part number 1-3
processor guide rails, removing 3-27
processor, removing 3-26
prompted diagnostics 4-19
Q
quick check diagnostics 4-19
QuickBlank
enabling 5-8
QuickLock
enabling 5-8
keyboard and mouse interface 5-9
R
re-enabling diskette boot 5-7
re-enabling serial port 5-7
Remote ROM Flash, using 4-34
removal and replacement
3.5-inch drive from a 5.25-inch drive adapter
3-12
3.5-inch drive from a 5.25-inch drive bay 3-12
3.5-inch hard drive 3-10
5.25-inch hard drive 3-14
access panel 3-4
battery 3-35
bezel 3-5
cable lock 3-3
card guide 3-22
DIMM moduel 3-25
disconnecting CD-ROM drive cables 3-13
disconnecting hard drive cables 3-9
drivelock 3-18
drivelock, reinstalling 3-18
expansion board 3-20
removal and replacement continued
front bezel 3-5
I/O panel 3-33
Intel Pentium II processor 3-26
lithium battery 3-35
lock, cable 3-3
logo plate 3-2
memory module 3-25
panel, access 3-4
Pentium II processor 3-26
plate, logo 3-2
power supply 3-30
power switch 3-31
processor 3-26
processor guide rails 3-27
speaker 3-28
subpanel and blank bezels 3-6
system board 3-32
Renata CR2032 lithium coin cell battery
location 3-34
resolutions
GLoria graphics controller 7-18
RJ-45 connector 8-2
ROM
upgrading 4-34
ROM BIOS
recovery from ROM upgrade failure 4-35
upgrading locally 4-34
upgrading remotely 4-34
ROMPaq
Remote ROM Flash 4-34
spares part number 1-5
S
screws
5.25 M3 3-8
HD 6-32 3-8
metric 3-8
SCSI
connector 8-2
pin assignments 8-8
SCSI cable
spares part number 1-4
using 3-16
SCSI devices 3-7, 3-15
important guidelines for 3-15
test error codes 4-31
SCSI devices problems, troubleshooting 4-15
SCSI LED cable
spares part number 1-4
