3-13
Compaq Professional Workstation AP200 Maintenance and Service Guide
5.25-Inch Drive
To remove a 5.25-inch drive:
CAUTION: Before removing the access panel, ensure that the workstation is
turned off, all cables are disconnected from the back of the workstation, and the
power cord is disconnected from the grounded AC outlet.
1.
Perform the service preparations shown on page 3-2.
2.
Remove the access panel.
3.
Remove the front bezel.
4.
Disconnect the power
1, data 2, and audio 3 cables from the back of the drive.
1
2
3
Figure 3-15. Disconnecting the cables
