background image

ALIX 3 Outdoor

Installation Guide

Thank you for purchasing an ALIX 3 Outdoor computer.

Your package should contain:

ALIX 3 board, outdoor case, pole mounting bracket, ethernet cable

Optional Extras

Compact Flash card

miniPCI card(s)

Pigtail(s)

Antenna(s)

POE injector and regulated power supply

Wall mounting bracket

Your ALIX 3 Outdoor is partially assembled for your convenience.  

Please read the following instructions to complete the assembly of your unit.

© Yawarra Tiny Computers

April 2014

Содержание ALIX 3 Outdoor

Страница 1: ...ole mounting bracket ethernet cable Optional Extras Compact Flash card miniPCI card s Pigtail s Antenna s POE injector and regulated power supply Wall mounting bracket Your ALIX 3 Outdoor is partially assembled for your convenience Please read the following instructions to complete the assembly of your unit Yawarra Tiny Computers April 2014 ...

Страница 2: ...n anti static wrist strap when handling the board Step 1 Remove the lid Using the 8mm socket or spanner remove the four bolts from the ALIX 3 Outdoor case Remove the lid and gasket Step 2 Configure and install a Compact Flash card To use your ALIX 3 Outdoor you will need to install a suitable operating system onto a CF card and insert it into the CF socket on the board This can be done by mounting...

Страница 3: ... the pigtail into the case This will ground the pigtail to the case Touch the u fl end of the pigtail to a ground point on the board to discharge any static then attach the u fl end to the connector on the wireless card We also recommend that you utilise some form of lightning protection when using wireless cards and boards in outdoor locations If necessary reattach the RJ45 pigtail and reinstall ...

Страница 4: ... thread the CAT5 cable through the assembly before crimping the RJ45 terminator onto the end Plug the ethernet cable into the ethernet port and tighten the assembly starting at the case end and working outwards Tighten the assembly by hand to avoid damaging the threads Antennas Screw the antennas onto the N Type bulkhead connectors on the case Step 7 Wall or pole mount the ALIX 3 Outdoor Using the...

Отзывы: