42-15
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
78-13315-02
Chapter 42 Configuring ASLB
Configuring ASLB
To commit your ASLB configuration settings, perform this task in privileged mode:
This example shows how to commit the ASLB configuration settings:
Console> (enable)
commit lda
Commit operation in progress...
Successfully committed Local Director Accelerator.
Console>
(enable)
Displaying the ASLB Configuration
Note
Entering
show lda
without a keyword (
committed
|
uncommitted
) displays committed
configuration settings.
To display committed or uncommitted ASLB configuration settings, perform this task in privileged
mode:
This example shows how to display committed ASLB configuration settings:
Console> (enable)
show lda committed
Status:Committed
Virtual IP addresses:
Local Director Flow:10.0.0.8/ (TCP port 8)
Router MAC:
00-23-45-67-ee-7f
LD MAC:00-11-22-33-55-66
LD Router Side:
---------------
Router and LD are on VLAN 110
LD is connected to switch port 4/26 on VLAN 110
LD Server Side:
---------------
Server(s) and LD are on VLAN 105
LD is connected to switch port 4/40 on VLAN 105
Console>
(enable)
Task
Command
Commit your ASLB configuration
settings.
commit lda
Task
Command
Display committed or uncommitted
ASLB configuration settings.
show lda
[
committed
|
uncommitted
]