15-9
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
78-13315-02
Chapter 15 Configuring NDE
Configuring NDE
This example shows how to remove a protocol for statistics collection:
Console> (enable)
clear mls statistics protocol 17 1934
Protocol 17 port 1934 cleared from protocol statistics list.
Console> (enable)
Clearing the NDE Flow Filter
To clear the NDE flow filter and reset the filter to the default (all flows exported), perform this task in
privileged mode:
This example shows how to clear the NDE flow filter so that all flows are exported:
Console> (enable)
clear mls nde flow
Netflow data export filter cleared.
Console> (enable)
Disabling NDE
Note
With Supervisor Engine 1 and a PFC, if NDE is enabled and you disable MLS, you lose the statistics
for existing cache entries—they are not exported.
To disable NDE on the switch, perform this task in privileged mode:
This example shows how to disable NDE on the switch:
Console> (enable)
set mls nde disable
Netflow data export disabled.
Console> (enable)
Removing the NDE IP Address
To remove the NDE IP address from the MSFC, perform this task in global configuration mode:
Task
Command
Clear the NDE flow filter.
clear mls nde flow
Task
Command
Disable NDE on the switch.
set mls nde disable
Task
Command
Remove the NDE IP address from the
MSFC.
Router(config)#
no mls nde-address
[
ip_addr
]
