42-12
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
78-13315-02
Chapter 42 Configuring ASLB
Configuring ASLB
This example shows how to enable ASLB on the switch:
Console> (enable)
set lda enable
Successfully enabled Local Director Accelerator.
Console>
(enable)
This example shows how to disable ASLB on the switch:
Console> (enable)
set lda disable
Successfully disabled Local Director Accelerator.
Console>
(enable)
Specifying Server Virtual-IP Addresses and TCP Ports for Acceleration
Note
You can specify up to 1024 virtual-IP addresses and TCP port pairs for acceleration by the
Catalyst 6000 family switch. Newly specified pairs do not replace previously specified pairs. To
cancel a previously entered pair, enter the
clear lda vip
command.
Note
You can use a zero (0) as a wildcard (don’t care) digit for the
destination_tcp_port
.
To specify server virtual-IP addresses and TCP ports for acceleration, perform this task in privileged
mode:
This example shows how to specify a server virtual-IP address and TCP port for acceleration:
Console> (enable)
set lda vip 10.0.0.8 8
Successfully set server virtual ip and port information.
Use commit lda command to save settings to hardware.
Console>
(enable)
Specifying MAC Addresses for Participating Routers
Note
You can specify up to 32 router MAC addresses.
To specify MAC addresses for participating routers, perform this task in privileged mode:
Task
Command
Specify server virtual-IP addresses and TCP
ports for acceleration.
set lda vip
{
server
_
virtual_ip
}
{
destination
_
tcp_port
} [{
server
_
virtual_ip
}
{
destination
_
tcp_port
}...]
Task
Command
Specify MAC addresses for participating routers.
set lda mac router
{
mac-address
}...
