40-14
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
78-13315-02
Chapter 40 Configuring Multicast Services
Configuring GMRP
Port based GMRP Configuration:
Port GMRP Status Registration ForwardAll
-------------------------------------------- ----------- ------------ ----------
1/1-2,3/1,6/1-48,7/1-24 Enabled Normal Disabled
Console> (enable)
Enabling GMRP on Individual Switch Ports
Note
You can change the per-port GMRP configuration regardless of whether GMRP is enabled globally.
However, GMRP will not function on any ports until you enable it globally. For information on
configuring GMRP globally on the switch, see the
“Enabling GMRP Globally” section on
page 40-13
.
To enable GMRP on individual switch ports, perform this task in privileged mode:
This example shows how to enable GMRP on port 6/12 and verify the configuration:
Console> (enable)
set port gmrp enable 6/12
GMRP enabled on port 6/12.
Console> (enable)
show gmrp configuration
Global GMRP Configuration:
GMRP Feature is currently enabled on this switch.
GMRP Timers (milliseconds):
Join = 200
Leave = 600
LeaveAll = 10000
Port based GMRP Configuration:
Port GMRP Status Registration ForwardAll
-------------------------------------------- ----------- ------------ ----------
1/1-2,3/1,6/1-9,6/12,6/15-48,7/1-24 Enabled Normal Disabled
6/10-11,6/13-14 Disabled Normal Disabled
Console> (enable)
Disabling GMRP on Individual Switch Ports
Note
You can change the per-port GMRP configuration regardless of whether GMRP is enabled globally.
However, GMRP will not function on any ports until you enable it globally. For information on
configuring GMRP globally on the switch, see the
“Enabling GMRP Globally” section on
page 40-13
.
To disable GMRP on individual switch ports, perform this task in privileged mode:
Task
Command
Step 1
Enable GMRP on an individual switch port.
set port gmrp enable
mod/port
Step 2
Verify the configuration.
show gmrp configuration
