40-25
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
78-13315-02
Chapter 40 Configuring Multicast Services
Displaying Multicast Protocol Status
Clearing RGMP Statistics
This command clears stored RGMP statistics.
To clear RGMP statistics, perform this task in privileged mode:
This example shows how to clear RGMP statistics:
Console> (enable)
clear rgmp statistics
RGMP statistics cleared.
Console> (enable)
RGMP-Related CLI Commands
The following RGMP-related CLI commands are accessible from the router:
Configuring RGMP on the MSFC
To configure RGMP on a VLAN interface on the MSFC, perform this task:
You can use the
debug ip rgmp
command to monitor RGMP on the MSFC.
Displaying Multicast Protocol Status
This command displays the status (enabled or disabled) of the Layer 2 multicast protocols on the switch.
To display the multicast protocol status, perform this task in privileged mode:
Task
Command
Clear RGMP statistics.
clear rgmp statistics
Task
Command
Enable or disable RGMP.
ip rgmp
Enable or disable RGMP debugging.
debug ip rgmp
{
group name
|
group
address
}
Task
Command
Step 1
Access VLAN interface configuration mode.
Router(config)#
interface vlan
vlan_ID
Step 2
Enable RGMP.
Router(config-if)#
ip rgmp
Task
Command
Display the multicast protocol status.
show multicast protocols status