manualshive.com logo in svg

Cisco TelePresence Server 7010, Руководство по установке

Сервер Cisco TelePresence 7010 - инновационное устройство для видеоконференций. Установочное руководство можно бесплатно скачать на нашем сайте. Загрузите его прямо сейчас, чтобы начать использовать этот продукт в полную меру его возможностей. manualshive.com - ваш источник полезной информации.

Поделиться
Скачать
background image

 

7-21

Firepower 7000 and 8000 Series Installation Guide

 

Chapter 7      Hardware Specifications

  Firepower 8000 Series Devices

Firepower 8000 Series Devices

The Firepower 8000 Series devices use network modules (NetMods) that contain either copper or fiber 
sensing interfaces. The devices can be shipped fully assembled or you can install the modules. Assemble 
your device before installing the Firepower System. See the assembly instructions shipped with your 
modules. 

Some 8000 Series devices can be stacked to increase the capability of the system. For each stacking kit, 
you replace a NetMod with a stacking module and cable the devices together using the 8000 Series 
stacking cable. See 

Using Devices in a Stacked Configuration, page 4-13

 for more information.

The Firepower 8000 Series device can be delivered on a variety of chassis: 

•

AMP8050 is a 1U chassis and can contain up to three modules.

•

Firepower 8120, 8130, 8140, and AMP8150, also known as the 81xx Family, is a 1U chassis and can 
contain up to three modules. For the Firepower 8140 only, you can add a stacking kit for a total 2U 
configuration.

•

Firepower 8250, part of the 82xx Family, is a 2U chassis and can contain up to seven modules. You 
can add up to three stacking kits for a total 8U configuration.

•

Firepower 8260, part of the 82xx Family, is a 4U configuration with two 2U chassis. The primary 
chassis contains one stacking module and up to six sensing modules. The secondary chassis contains 
one stacking module. You can add up to two stacking kits for a total 8U configuration.

•

Firepower 8270, part of the 82xx Family, is a 6U configuration with three 2U chassis. The primary 
chassis contains two stacking modules and up to five sensing modules. Each secondary chassis 
contains one stacking module. You can add one stacking kit for a total 8U configuration.

•

Firepower 8290, part of the 82xx Family, is an 8U configuration with four 2U chassis. The primary 
chassis contains three stacking modules and up to four sensing modules. Each secondary chassis 
contains one stacking module. This model is fully configured and does not accept a stacking kit.

•

Firepower 8350 and AMP8350, part of the 83xx Family, is a 2U chassis and can contain up to seven 
modules. You can add up to three stacking kits for a total 8U configuration.

•

Firepower 8360 and AMP8360, part of the 83xx Family, is a 4U configuration with two 2U chassis. 
The primary chassis contains one stacking module and up to six sensing modules. The secondary 
chassis contains one stacking module. You can add up to two stacking kits for a total 8U 
configuration.

•

Firepower 8370 and AMP8370, part of the 83xx Family, is a 6U configuration with three 2U chassis. 
The primary chassis contains two stacking modules and up to five sensing modules. Each secondary 
chassis contains one stacking module. You can add one stacking kit for a total 8U configuration.

Acoustic noise

64 dBA at full processor load, normal fan operation
Meets GR-63-CORE 4.6 Acoustic Noise

Operating shock

Complies with Bellecore GR-63-CORE standards

Airflow

140 ft

3

 (3.9 m

3

) per minute

Airflow through the appliance enters at the front and exits at the rear with no side 
ventilation.

Table 7-33

Firepower 7115, 7125, and AMP7150 Physical and Environmental Parameters (continued)

Parameter

Description

Содержание TelePresence Server 7010













































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TelePresence Server 7010

H&S CH3130 Operator'S Manual preview
CH3130
Бренд: H&S Страницы: 32
National Instruments NI 9148 Operating Instructions Manual preview
NI 9148
Бренд: National Instruments Страницы: 20
Juniper PTX10008 Quick Start Manual preview
PTX10008
Бренд: Juniper Страницы: 45
National Instruments cRIO-9148 User Manual And Specifications preview
cRIO-9148
Бренд: National Instruments Страницы: 23
Haivision MB21 Installation Manual preview
MB21
Бренд: Haivision Страницы: 29
magicpak HWC12P Series Installation Instructions preview
HWC12P Series
Бренд: magicpak Страницы: 2
National Instruments VXI-1200 User Manual preview
VXI-1200
Бренд: National Instruments Страницы: 72
Patton electronics ForeFront 6476 User Manual preview
ForeFront 6476
Бренд: Patton electronics Страницы: 50
D-Link DMC 1000 - Modular Expansion Base Quick Installation Manual preview
DMC 1000 - Modular Expansion Base
Бренд: D-Link Страницы: 16
National Instruments NI PXI-1006 Installation Manual preview
NI PXI-1006
Бренд: National Instruments Страницы: 2
Supero SC510 Series User Manual preview
SC510 Series
Бренд: Supero Страницы: 39
ADLINK Technology PXIS-2700 User Manual preview
PXIS-2700
Бренд: ADLINK Technology Страницы: 43
ADLINK Technology PXIS-3320 User Manual preview
PXIS-3320
Бренд: ADLINK Technology Страницы: 50
ADLINK Technology cPCIS-6418U Series User Manual preview
cPCIS-6418U Series
Бренд: ADLINK Technology Страницы: 66
Aurora DXM G4 Series User Manual preview
DXM G4 Series
Бренд: Aurora Страницы: 57

Бренды по названию

Популярные бренды

Загрузить еще бренды