Cisco Small Business 300 1.1 Series, Руководство администратора

Страница: 572 / 706

Quality of Service (QoS) Commands
78-20269-01 Command Line Interface Reference Guide 574
41
Command Mode
Policy-map Class Configuration mode
User Guidelines
An aggregate policer can be applied to multiple classes in the same policy map.
An aggregate policer cannot be applied across multiple policy maps or interfaces.
Use the exit command to return to the Policy-map Configuration mode. Use the
end command to return to the Privileged EXEC mode.
Example
The following example applies the aggregate policer called Policer1 to a class
called class1 in a policy map called policy1 and class2 in policy map policy2.
Console(config)# qos aggregate-policer policer1 124000 9600 exceed-action
drop
Console(config)# policy-map policy1
Console(config-pmap)#
class
class1
Console(config-pmap-c)#
police aggregate
policer1
Console(config-pmap-c)# exit
Console(config-pmap)#
exit
Console(config)#
policy-map
policy2
Console(config-pmap)# class class2
Console(config-pmap-c)#
police aggregate
policer1
41.17 wrr-queue cos-map
Use the wrr-queue cos-map Global Configuration mode command to map Class of
Service (CoS) values to a specific egress queue. Use the no form of this command
to restore the default configuration.
Syntax
wrr-queue cos-map
queue-id cos0
...
cos7
no wrr-queue cos-map [
queue-id
]