Cisco Small Business 300 1.1 Series, Руководство администратора

Страница: 562 / 706

Quality of Service (QoS) Commands
78-20269-01 Command Line Interface Reference Guide 564
41
policy map can be configured only if the classes have match criteria defined for
them.
Policy map is applied on the ingress path.
The match criteria is for a class map. Only one policy map per interface is
supported. The same policy map can be applied to multiple interfaces and
directions.
The service-policy command binds a policy map to a port/port-channel.
Example
The following example creates a policy map called Policy1 and enters the
Policy-map Configuration mode.
Console(config)# policy-map policy1
Console(config-pmap)#
41.8 class
Use the class Policy-map Configuration mode command after the policy-map
command to attach ACLs to a policy-map.
Use the no form of this command to detach a class map from a policy map.
This command is only available when QoS is in advanced mode.
Syntax
class
class-map-name [
access-group
acl-name
]
no class
class-map-name
Parameters
•
class-map-name—Specifies the name of an existing class map. If the class
map does not exist, a new class map is created under the specified name.
•
access-group
acl-name
—Specifies the name of an IP or MAC Access
Control List (ACL).
Default Configuration
No class map is defined for the policy map.