Cisco Small Business 300 1.1 Series, Руководство администратора

Страница: 371 / 706

Spanning-Tree Commands
78-20269-01 Command Line Interface Reference Guide 372
29
29.12 spanning-tree pathcost method
Use the spanning-tree pathcost method Global Configuration mode command to
set the default path cost method. Use the no form of this command to return to the
default configuration.
Syntax
spanning-tree pathcost method
{long | short}
no spanning-tree pathcost method
Parameters
•
long
—
Specifies that the default port path costs are within the range:
1–200,000,000.
•
short—Specifies that the default port path costs are within the range:
1–65,535.
Default Configuration
Long path cost method.
Command Mode
Global Configuration mode
User Guidelines
This command applies to all the spanning tree instances on the switch.
•
If the short method is chosen, the switch use for the default cost values in
the range 1 through 65,535.
•
If the long method is chosen, the switch use for the default cost values in the
range 1 through 200,000,000.
Example
The following example sets the default path cost method to Long.
Console(config)# spanning-tree pathcost method long