manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Руководство администратора

Поделиться
Скачать
Cisco Small Business 300 1.1 Series Скачать руководство пользователя страница 357

Address Table Commands

78-20269-01 Command Line Interface Reference Guide

358

27

 

Default Configuration

If an <address, frame type, protocol> tuple is mapped to an application that is 
supported by the device then the default is Peer (handled by the application 
rules). Otherwise: 

For addresses in the range 01-80-C2-00-00-00, 01-80-C2-00-00-02– 
01-80-C2-00-00-0F, the default is discard. For addresses in the range 
00-80-C2-00-00-10– 01-80-C2-00-00-2F, the default is bridge.

Command Mode 

Global Configuration mode

User Guidelines

If the packet/service type is not specified, the configuration is relevant to all the 
packets with the configured MAC address.

Specific configurations (that contain service type) have precedence over less 
specific configurations (contain only MAC address).

The packets that are bridged are subject to security ACLs.

The actions define by this command has precedence over forwarding rules 
defined by applications/protocols (STP, LLDP etc.) supported on the device.

27.31 show bridge multicast reserved-addresses

Use the show bridge multicast reserved-addresses EXEC mode command to 
display the multicast reserved-address rules.

Syntax

show bridge multicast reserved-addresses

Command Mode

EXEC mode

Example

Console # 

show bridge multicast reserved-addresses

MAC addressFrame typeProtocolAction

------------------------------------------------------

Содержание Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды