Cisco Small Business 300 1.1 Series, Руководство администратора

Страница: 477 / 706

IP Addressing Commands
78-20269-01 Command Line Interface Reference Guide 478
35
35
IP Addressing Commands
35.1 ip address
Use the ip address Interface Configuration (Ethernet, VLAN, Port-channel) mode
command to define an IP address for an interface. Use the no form of this
command
to remove an IP address definition.
Syntax
If the product is a switch router.
ip address
ip-address
{
mask
|
prefix-length
}
no ip address [
ip-address
]
If the product is a switch only.
ip address
ip-address
{
mask
| /
prefix-length
} [default-gateway
ip-address
]
no ip address [
ip-address
]
If the product is switch only and supports a single IP address:
ip address
ip-address
{
mask
| /
prefix-length
} [default-gateway
ip-address
]
no ip address
Parameters
•
ip-address—Specifies the IP address.
•
mask—Specifies the network mask of the IP address.
•
prefix-length—Specifies the number of bits that comprise the IP address
prefix.The prefix length must be preceded by a forward slash (/). (Range:
8–30)
•
default-gateway
ip-address
—Specifies the default gateway IP address.
Default Configuration
No IP address is defined for interfaces.
Command Mode
Interface Configuration (Ethernet, VLAN, Port-channel) mode. It cannot be
configured for a range of interfaces (range context).