manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Руководство администратора

Поделиться
Скачать
Cisco Small Business 300 1.1 Series Скачать руководство пользователя страница 116

Configuration and Image File Commands

78-20269-01 Command Line Interface Reference Guide

117

7

 

If the egress interface is not specified, the default interface is selected. The 
following combinations are possible:

•

ipv6_address%interface_id -

 

Refers to the IPv6 address on the interface 

specified.

•

ipv6_address%0

 

- Refers to the IPv6 address on the single interface on 

which an IPv6 address is defined.

•

ipv6_address - Refers to the IPv6 address on the single interface on which 
an IPv6 address is defined.

Understanding Invalid Combinations of Source and Destination

The following are invalid combinations of source and destination files:

•

The source file and destination file are the same file.

•

xmodem: is the destination file. The source file can be copied to image, 
boot and null: only.

•

tftp:// is the source file and destination file on the same copy.

•

*.prv files cannot be copied.

•

The destination file cannot be the Running Configuration file.

•

<for products with mirror-config>mirror-config cannot be used as a 
destination

The following table describes the characters displayed by the system when copy 
is being run:

Copying an Image File from a Server to Flash Memory

Use the copy 

source-url

 flash://image command to copy an image file from a 

server to flash memory. When the administrator copies an image file from the 
server to a device, the image file is saved to the "inactive" image. To use this image, 
the administrator must switch the inactive image to the active image and reboot. 
The device will then use this new image. 

Character

Description

!

For network transfers, indicates that the copy process 
is taking place. Each exclamation point indicates 
successful transfer of ten packets (512 bytes each).

.

For network transfers, indicates that the copy process 
timed out. 

Содержание Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды