Cisco Small Business 300 1.1 Series, Руководство администратора

Страница: 281 / 706

Ethernet Configuration Commands
78-20269-01 Command Line Interface Reference Guide 282
21
Example
The following example enables jumbo frames on the device.
Console(config)# port jumbo-frame
21.12 clear counters
Use the show interfaces counters EXEC mode command to display traffic seen by
all the physical interfaces or by a specific interface.
Syntax
show interfaces counters [interface-id] [detailed]
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
detailed—Displays information for non-present ports in addition to present ports.
Command Mode
EXEC mode
Example
The following example clears the statistics counters for
gi
5.
Console# clear counters gi5.
21.13 set interface active
Use the set interface active EXEC mode command to reactivate an interface that
was shut down.
Syntax
set interface active
{interface-id}