manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Руководство администратора

Поделиться
Скачать
Cisco Small Business 300 1.1 Series Скачать руководство пользователя страница 154

Network Management Protocol (SNMP) Commands

78-20269-01 Command Line Interface Reference Guide

155

10

 

•

informs—Sends SNMP informs to this host. Not applicable to SNMPv1.

•

1—SNMPv1 traps are used.

•

2c—SNMPv2 traps are used

•

3—SNMPv2 traps are used

•

community-string—Password-like community string sent with the 
notification operation. (Range: 1–20 characters)

•

noauth—Specifies no authentication of a packet.

•

auth—Specifies authentication of a packet without encrypting it.

•

priv—Specifies authentication of a packet with encryption.

•

udp-port 

port

—UDP port of the host to use. The default is 162. (Range: 

1–65535)

•

filter 

filtername

—A string that is the name of the filter that defines the filter 

for this host. If unspecified, nothing is filtered. The filter should be defined 
using the command snmp-server filter (no specific order of the command 
configurations is imposed on the user). (Range: Up to 30 characters)

•

timeout 

seconds

—Number of seconds to wait for an acknowledgment 

before resending informs. The default is 15 seconds. The parameter is 
relevant only for informs. (Range: 1–300)

•

retries 

retries

—Maximum number of times to resend an inform request, 

when a response is not received for a generated message. The default is 3. 
The parameter is relevant only for informs. (Range: 0–255)

Command Mode

Global Configuration mode

User Guidelines

The logical key of the command is the pair (ip-address/hostname, traps/informs, 
version).

When configuring snmp v1 or v2 notifications recipient, the software automatically 
generates a notification view for that recipient for all MIBs. For SNMPv3 the 
software doesn’t automatically create a user nor a notify view. Use the commands 
snmp-server user, snmp-server group and snmp-server view in Global 
Configuration mode to create a user, a group or a notify group respectively.

The format of an IPv6Z address is: <

ipv6-link-local-address>%<interface-name

>

Содержание Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды