Cisco Small Business 300 1.1 Series, Руководство администратора

Страница: 330 / 706

Address Table Commands
78-20269-01 Command Line Interface Reference Guide 331
27
Syntax
bridge multicast source
ip-address
group
ip-multicast-address [[add | remove]
{ethernet interface-list | port-channel port-channel-list}]
no bridge multicast source ip-address group ip-multicast-address
Parameters
•
ip-address—Specifies the source IP address.
•
ip-multicast-address—Specifies the group IP multicast address.
•
add—Adds ports to the group for the specific source IP address.
•
remove—Removes ports from the group for the specific source IP address.
•
ethernet
interface-list
—Specifies a list of Ethernet ports. Separate
nonconsecutive Ethernet ports with a comma and no spaces. Use a hyphen
to designate a range of ports.
•
port-channel port-channel-list —Specifies a list of port channels. Separate
nonconsecutive port-channels with a comma and no spaces; use a hyphen
to designate a range of port channels.
Default Configuration
No multicast addresses are defined.
The default option is add.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
You can execute the command before the VLAN is created.
Example
The following example registers a source IP address - multicast IP address pair to
the bridge table:
Console(config)# interface vlan 8
Console(config-if)# bridge multicast source 239.2.2.2 group 239.2.2.2