manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Руководство администратора

Поделиться
Скачать
Cisco Small Business 300 1.1 Series Скачать руководство пользователя страница 427

Virtual Local Area Network (VLAN) Commands

78-20269-01 Command Line Interface Reference Guide

428

30

 

no switchport default-vlan tagged

Parameters

N/A

Default Configuration 

If the port is a member in the default VLAN, by default, it is a member as an 
untagged port.

Command Mode 

Interface configuration (Ethernet, port-channel)

User Guidelines

The command adds a port to the default VLAN as a tagged port.

The command is available only if the port mode is trunk or general.

When a trunk port is a member in the default VLAN as a tagged port then:

•

The native VLAN cannot be the default VLAN

•

The default of the native VLAN is 4095

Note: If the native VLAN of a port is the default VLAN when the port is added to the 
default VLAN as tagged, the native VLAN is set by the system to 4095.

When a general port is a member in the default VLAN as a tagged port then:

•

The PVID can be the default VLAN.

•

 The default PVID is the default VLAN.

Note: The PVID is not changed when the port is added to the default VLAN as a 
tagged.

When executing the switchport default-vlan tagged command, the port is added 
(automatically by the system) to the default VLAN when the following conditions 
no  longer exist:

•

The port is a member in a LAG.

•

The port is 802.1X unauthorized.

•

An IP address is defined on the port.

•

The port is a destination port of port mirroring.

•

An IP address is defined on the default VLAN and the port is a PVE 
protected port.

Содержание Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды