Cisco Small Business 300 1.1 Series, Руководство администратора

Страница: 221 / 706

Syslog Commands
78-20269-01 Command Line Interface Reference Guide 222
18
Parameters
level—Specifies the severity level of logged messages displayed on the console.
The possible values are: emergencies, alerts, critical, errors, warnings,
notifications, informational and debugging.
Default Configuration
Informational.
Command Mode
Global Configuration mode
Example
The following example limits logging messages displayed on the console to
messages with severity level errors.
Console(config)# logging console errors
18.4 logging buffered
Use the logging buffered Global Configuration mode command to limit the
SYSLOG message display to messages with a specific severity level, and to
define the buffer size (number of messages that can be stored). Use the no form of
this command to cancel displaying the SYSLOG messages, and to return the
buffer size to default.
Syntax
logging buffered [
buffer-size
] [
severity
-
level | severity-level-name
]
no logging buffered
Parameters
•
buffer-size—Specifies the maximum number of messages stored in the
history table. (Range: 20–400)
•
severity-level—Specifies the severity level of messages logged in the
buffer. The possible values are: 1-7.
•
severity-level-name—Specifies the severity level of messages logged in
the buffer. The possible values are: emergencies, alerts, critical, errors,
warnings, notifications, informational and debugging.