manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Руководство администратора

Поделиться
Скачать
Cisco Small Business 300 1.1 Series Скачать руководство пользователя страница 502

IPv6 Addressing Commands

78-20269-01 Command Line Interface Reference Guide

503

36

 

•

anycast—(Optional) Indicates that this address is an anycast address.

•

prefix-length—3–128 (64 when the eui-64 parameter is used.

Default Configuration 

No IP address is defined for the interface.

Command Mode

Interface configuration (Ethernet, VLAN, Port-channel) mode. It cannot be 
configured for a range of interfaces (range context).

User Guidelines

If the value specified for the /prefix-length argument is greater than 64 bits, the 
prefix bits have precedence over the interface ID.

Using the no IPv6 address command without arguments removes all manually 
configured IPv6 addresses from an interface, including link local manually 
configured addresses.

Example

console(config)# 

interface

 

vlan

 1

console(config-if)# 

ipv6 address

 3000::123/64 

eui-64 anycast

36.6

ipv6 address link-local

Use the ipv6 address link-local command to configure an IPv6 link-local address 
for an interface. Use the no form of this command to return to the default link local 
address on the interface.

Syntax

ipv6 address

 ipv6-address/prefix-length

 link-local

no ipv6 address [i

pv6-address/prefix-length

 link-local]

Parameters

•

ipv6-address—Specifies the IPv6 network assigned to the interface.This 
argument must be in the form documented in RFC 2373 where the address 
is specified in hexadecimals using 16-bit values between colons.

Содержание Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды