manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Руководство администратора

Поделиться
Скачать
Cisco Small Business 300 1.1 Series Скачать руководство пользователя страница 145

Network Management Protocol (SNMP) Commands

78-20269-01 Command Line Interface Reference Guide

146

10

 

no snmp-server community 

string [ipv4-address| ipv6-address]

Parameters

•

string—Community string that acts like a password and permits access to 
the SNMP protocol. (Range: 1–20 characters)

•

ro—Specifies read-only access (default)

•

rw—Specifies read-write access

•

su—Specifies SNMP administrator access

•

view 

view-name

—Specifies the name of a view to be configured using the 

command snmp-server view (no specific order of the command 
configurations is imposed on the user). The view defines the objects 
available to the community. It is not relevant for su, which has access to the 
whole MIB. If unspecified, all the objects, except the community-table and 
SNMPv3 user and access tables, are available. (Range: 1–30 characters)

•

ipv4-address—Management station IPv4 address. The default is all IP 
addresses.

•

ipv6-address—Management station IPv4 address. The default is all IP 
addresses.

The following combinations are possible:

-

ipv6_address%interface_id - Refers to the IPv6 address on the interface 
specified.

-

ipv6_address%0 - Refers to the IPv6 address on the single interface on 
which an IPv6 address is defined.

-

 ipv6_address - Refers to the IPv6 address on the single interface on 
which an IPv6 address is defined.

•

mask—Specifies the mask of the IPv4 address. This is not a network mask, 
but rather a mask that defines which bits of the packet’s source address are 
compared to the configured IP address. If unspecified, it defaults to 
255.255.255.255. The command returns an error if the mask is specified 
without an IPv4 address.

•

prefix-length—Specifies the number of bits that comprise the IPv4 address 
prefix. If unspecified, it defaults to 32. The command returns an error if the 
prefix-length is specified without an IPv4 address.

Содержание Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды