Cisco ONS 15200 Series, Инструкция по установке, настройке и эксплуатации

Страница: 8 / 136

Figures
viii
Cisco ONS 15200 Installation, Setup, and Test Manual
78-13765-01
Figure 3-27 Side view of a CMX module
3-37
Figure 3-28 Side view of a CMY module
3-39
Figure 3-29 Installing a Dummy Filter module in an ONS 15252 MCU
3-40
Figure 3-30 The ONS 15252 MCU passive optical shelf after the modules are connected
3-41
Figure 3-31 Installing an ONS 15252 MCU Network Adaptation module (Part 1)
3-43
Figure 3-32 Installing an ONS 15252 MCU Network Adaptation module (Part 2)
3-44
Figure 3-33 Installing an ONS 15252 MCU Network Adaptation module (Part 3)
3-45
Figure 3-34 An installed ONS 15252 MCU Dummy Network Adaptation module
3-46
Figure 3-35 The cover lid of the ONS 15201 SCU Collector Filter module
3-47
Figure 3-36 Position of retaining screws on the Collector Filter module cover lid
3-48
Figure 3-37 ONS 15201 SCU rear connector cover and retaining screws
3-48
Figure 3-38 CFM for an unprotected channel (100/0 or 0/100)
3-49
Figure 3-39 CFM for a protected channel (90/10, 10/90, or 50/50)
3-49
Figure 3-40 90/10 split ratio (protected) connections
3-50
Figure 3-41 10/90 split ratio (protected) connections
3-50
Figure 3-42 50/50 split ratio (protected) connections for a CFM
3-51
Figure 3-43 0/100 split ratio (unprotected) connections for a CFM
3-51
Figure 3-44 100/0 split ratio (unprotected) connections for a CFM
3-52
Figure 3-45 MCU CAN-bus access points
3-54
Figure 3-46 SCU CAN-bus access points
3-54
Figure 3-47 Jumpers on the MCU backplane
3-55
Figure 4-1 Communication Interface module connections
4-3
Figure 4-2 An OSA-to-LM connection
4-8
Figure 4-3 Attenuators from the A Side and B Side Line modules
4-9
Figure 4-4 Daisy-chained CLIP modules
4-11
Figure 4-5 ONS 15201 SCU management access interface
4-14
Figure 4-6 ONS 15201 SCU CLIP Module A side and B side with attenuators
4-16
Figure 4-7 ONS 15201 SCU in a daisy-chain configuration
4-18
Figure 4-8 ONS 15200 system span test connection (hub configuration)
4-20