Cisco ONS 15200 Series, Инструкция по установке, настройке и эксплуатации

Страница: 32 / 136

3-6
Cisco ONS 15200 Installation, Setup, and Test Manual
78-13765-01
Chapter 3 Installation
The ONS 15252 Release 1.0.1 includes an updated Network Adaptation module (NAM). The Release
1.0.1 NAM is designated with a “NEBS-3 compliant” label on the faceplate, whereas the previous
version of the NAM does not have a faceplate label. The Release 1.0.1 shelf requires the Release 1.0.1
NAM. You can also use Release 1.0.1 NAMs in the Release 1.0 shelf. See the Cisco ONS 15200 Module
Handbook for more information about the NAM.
Caution Cisco does not recommend or support placing NAMs without the “NEBS-3 compliant” label into an
Release 1.0.1 shelf. Equipment damage may occur.
3.3 Fiber Cleaning
You will need a Cletop cleaning kit (type A for SC and type B for MU fiber connectors) to clean the fiber
connectors and adapters before installing fiber.
Caution Clean the fibers before use to prevent equipment damage.
Procedure: Clean Fiber Connectors
Warning Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector.
Do not stare into the beam or view directly with optical instruments.
Step 1 Remove the dust cap from the fiber connector.
Step 2
Insert the connector into the Cletop cleaning cassette slot, rotate one quarter turn, and gently swipe
downwards.
Step 3 Insert the fiber connector into the applicable adapter.
Step 4
Place dust caps on the fiber connectors when not in use.
Procedure: Clean Fiber Adapters
Step 1
Remove the dust plug from the fiber adapter.
Step 2 Insert a cleaning stick into the adapter opening.
Step 3 To access the male connector in the adapter, loosen the two screws that attach the metal cover to the
CLIP, and remove the metal cover.
Step 4 Clean the male connector in the fiber adapter.
Step 5 Place dust plugs on the fiber adapters when not in use.