Cisco aironet 1130 Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 184

background image

56

Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0

OL-20213-01

Connecting the Cisco 1520 Series Mesh Access Point to Your Network

Caution

Upgrade to release 5.2 from the latest 4.1.192.xxM mesh release prior to upgrading to release 6.0.
Upgrading directly to release 5.2 from either 4.1.190.05 or 4.1.191.22M is not supported. For details on
upgrading to latest version of 4.1.192.xxM from an earlier mesh release, refer to the

“Upgrade

Compatibility Matrix”

in the

Release Notes for Cisco Wireless LAN Controllers and Mesh Access Points

for Release 4.1.192.35M (or later)

at:

http://www.cisco.com/en/US/products/ps6366/prod_release_notes_list.html

Note

When upgrading to an intermediate software release as part of the 4.1.192.xxM to release 5.2 and then
to release 6.0 controller software upgrade, ensure that all mesh access points associated with the
controller are at the same intermediate release before preceding to install the next intermediate or final
version of software. In large networks, it can take some time to download the software on each mesh
access point.

Note

If you are upgrading from mesh release 4.1.191.22M to the latest 4.1.192.xxM before upgrading to the
release 5.2 (prior to upgrading to release 6.0), you must manually reset the controller immediately after
the upgrade without saving the configuration. Be sure to check the RRM configurations after the upgrade
to see if all match your earlier configurations.

Caution

A backup of your controller configuration file is recommended prior to any software upgrade. Without
this backup, you will need to manually reconfigure the controller should the configuration file be lost or
corrupted or if you need to downgrade.

To upgrade the mesh controller software using the controller GUI, follow these steps.

Step 1

Upload your controller configuration files to a backup server.

Step 2

Follow these steps to obtain the mesh controller software and the associated boot images

from

the

Software Center on Cisco.com:

a.

Click this URL to go to the Software Center:

http://www.cisco.com/kobayashi/sw-center/sw-wireless.shtml

b.

Click

Wireless Software

.

c.

Click Wireless LAN Controllers.

d.

Click

Standalone Controllers

,

Wireless Integrated Routers

, or

Wireless Integrated Switches.

e.

Click the controller product name.

f.

Click

Wireless LAN Controller Software

.

g.

Click a controller software release.

Note

Verify that the software release is 6.0.

h.

Click the filename (

filename

.aes).

i.

Click

Download

.

«
...
54
55
56
57
58
...
»

Содержание aironet 1130

























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для aironet 1130

Бренд: D-Link Страницы: 29

DGS-3700 Series

Бренд: D-Link Страницы: 292

Бренд: D-Link Страницы: 140

DGS-1224T - Web Smart Switch

Бренд: D-Link Страницы: 61

DI-LB604 - Load Balancing Router

Бренд: D-Link Страницы: 14

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 45

Бренд: D-Link Страницы: 218

DES-3528 - xStack Switch - Stackable

Бренд: D-Link Страницы: 322

DIR-130 - Broadband VPN Router

Бренд: D-Link Страницы: 10

DIR-130 - Broadband VPN Router

Бренд: D-Link Страницы: 4

DIR-130 - Broadband VPN Router

Бренд: D-Link Страницы: 13

Бренд: D-Link Страницы: 13

DI-804HV - Express ENwork Router

Бренд: D-Link Страницы: 19

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 8

Бренд: D-Link Страницы: 16

Бренд: D-Link Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды