105
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
OL-20213-01
Connecting the Cisco 1520 Series Mesh Access Point to Your Network
Using the CLI to Configure Ethernet VLAN Tagging
•
To configure a MAP
access
port, enter this command:
config ap ethernet 1 mode access enable
AP1520-MAP 50
where
AP1520-MAP
is the variable
AP_name
and
50
is the variable
access_vlan ID
•
To configure a RAP or MAP
trunk
port, enter this command:
config ap ethernet 0 mode trunk enable
AP1520-MAP 60
where
AP1520-MAP
is the variable
AP_name
and
60
is the variable
native_vlan ID
–
To add a VLAN to the VLAN allowed list of the native VLAN, enter this command:
config ap ethernet 0 mode trunk add
AP1522-MAP3 65
where
AP1522-MAP 3
is the variable
AP_name
and
65
is the variable
vlan ID
Using the CLI to View Ethernet VLAN Tagging Configuration Details
•
To view VLAN configuration details for Ethernet interfaces on a specific mesh access point (
AP
Name
) or all mesh access points (
summary
), enter one of the following commands: