3-2
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 3 Configuring the Router for the First Time
Default Configuration
Default Configuration
Table 3-1
shows the default configuration.
Configuring the Router
These sections describe how to configure the router:
•
Using the Setup Facility or the setup Command, page 3-2
•
Using Configuration Mode, page 3-10
•
Checking the Running Configuration Before Saving, page 3-10
•
Saving the Running Configuration Settings, page 3-11
•
Reviewing the Configuration, page 3-11
•
Configuring a Default Gateway, page 3-12
•
Configuring a Static Route, page 3-12
•
Configuring a BOOTP Server, page 3-14
Using the Setup Facility or the setup Command
These sections describe the setup facility and the
setup
command:
•
Setup Overview, page 3-2
•
Configuring the Global Parameters, page 3-3
•
Configuring Interfaces, page 3-8
Setup Overview
At initial startup, the router automatically defaults to the setup facility. (The
setup
command facility
functions exactly the same as a completely unconfigured system functions when you first boot it up.)
You can run the setup facility by entering the
setup
command at the enable prompt (#).
Table 3-1
Default Configuration
Feature
Default Value
Administrative connection
Normal mode
Global information
No value for the following:
•
System name
•
System contact
•
Location
System clock
No value for system clock time
Passwords
No passwords configured for normal mode or
enable mode (press the
Return
key)
Prompt
Router>
