manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 695 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 695

 

E-9

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Appendix E      Addresses, Protocols, and Ports

  IPv6 Addresses

Figure E-1

IPv6 Multicast Address Format

IPv6 nodes (hosts and routers) are required to join the following multicast groups:

•

The All Nodes multicast addresses:

–

FF01:: (interface-local)

–

FF02:: (link-local)

•

The Solicited-Node Address for each IPv6 unicast and anycast address on the node: 
FF02:0:0:0:0:1:FFXX:XXXX/104, where XX:XXXX is the low-order 24-bits of the unicast or 
anycast address.

Note

Solicited-Node addresses are used in Neighbor Solicitation messages.

IPv6 routers are required to join the following multicast groups:

•

FF01::2 (interface-local)

•

FF02::2 (link-local)

•

FF05::2 (site-local)

Multicast address should not be used as source addresses in IPv6 packets.

Note

There are no broadcast addresses in IPv6. IPv6 multicast addresses are used instead of broadcast 
addresses.

Anycast Address

The IPv6 anycast address is a unicast address that is assigned to more than one interface (typically 
belonging to different nodes). A packet that is routed to an anycast address is routed to the nearest 
interface having that address, the nearness being determined by the routing protocol in effect.

Anycast addresses are allocated from the unicast address space. An anycast address is simply a unicast 
address that has been assigned to more than one interface, and the interfaces must be configured to 
recognize the address as an anycast address.

92617

128 bits

4 bits

4 bits

0 if permanent
1 if temporary

Interface ID

0

1111 1111

8 bits

8 bits

F

F

Flag

Scope

Flag

 =

Scope =

1 = node
2 = link
4 = admin
5 = site
8 = organization
E = global

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов