manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 358 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 358

 

17-14

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 17      Applying AAA for Network Access

  Using MAC Addresses to Exempt Traffic from Authentication and Authorization

hostname(config)#

 aaa-server AuthOutbound protocol

hostname(config-aaa-server-group)#

 exit

hostname(config)#

 aaa-server AuthOutbound (inside) host 10.1.1.1

hostname(config-aaa-server-host)#

 key TACPlusUauthKey

hostname(config-aaa-server-host)#

 exit

hostname(config)# 

access-list TELNET_AUTH extended permit tcp any any

 

eq telnet

hostname(config)# 

access-list SERVER_AUTH extended permit tcp any host 209.165.201.5 eq 

telnet

hostname(config)# 

aaa authentication match TELNET_AUTH inside AuthOutbound

hostname(config)# 

aaa authorization match SERVER_AUTH inside AuthOutbound

hostname(config)# 

aaa accounting match SERVER_AUTH inside AuthOutbound

Using MAC Addresses to Exempt Traffic from Authentication 
and Authorization

The FWSM can exempt traffic from specific MAC addresses from being authenticated or authorized. 
This feature is particularly useful to exempt devices such as IP phones that cannot respond to 
authentication prompts.

Note

This feature exempts the list of MAC addresses for through-the-box connections only. For connections 
like Telnet to the FWSM, the authentication or authorization is not exempted even if the MAC address 
of the device is specified.

To identify MAC addresses for exemption, perform the following steps:

Step 1

To configure a MAC list, enter the following command:

hostname(config)# 

mac-list

 

id

 {

deny

 | 

permit

} 

mac

 

macmask

Where the 

id 

argument is the hexadecimal number that you assign to the MAC list.

To exempt a MAC address, use the 

permit

 keyword. To allow a MAC address to be authenticated and 

authorized, use the 

deny

 keyword.

To group a set of MAC addresses, enter the 

mac-list

 command as many times as needed with the same 

ID value. Because you can only use one MAC list for AAA exemption, be sure that your MAC list 
includes all the MAC addresses you want to exempt. You can create multiple MAC lists, but you can only 
use one at a time. 

The order of entries

 

matters, because the packet uses the first entry it matches, as opposed to a best match 

scenario. If you have a 

permit

 entry, and you want to deny an address that is allowed by the 

permit

 entry, 

be sure to enter the 

deny

 entry before the 

permit

 entry.

The

 mac 

argument

 

specifies the source MAC address in 12-digit hexadecimal form; that is, 

nnnn.nnnn.nnnn.

The 

macmask

 argument specifies the portion of the MAC address that should be used for matching. For 

example, ffff.ffff.ffff matches the MAC address exactly. ffff.ffff.0000 matches only the first 8 digits.

Step 2

To exempt traffic for the MAC addresses specified in a particular MAC list, enter the following 
command:

hostname(config)# 

aaa

 

mac-exempt

 

match 

id

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов