manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 332 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 332

 

16-28

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 16      Configuring NAT

  Using Dynamic NAT and PAT

traffic. Each TCP connection has two ISNs: one generated by the client and one generated by 
the server. The security appliance randomizes the ISN of the TCP SYN passing in the outbound 
direction. If the connection is between two interfaces with the same security level, then the ISN 
will be randomized in the SYN in both directions. Randomizing the ISN of the protected host 
prevents an attacker from predicting the next ISN for a new connection and potentially hijacking 
the new session.

Note

You can alternatively set connection limits (but not embryonic connection limits) using the 
Modular Policy Framework. See the 

“Configuring Connection Limits and Timeouts” section on 

page 21-1

 for more information. You can only set embryonic connection limits using NAT. If you 

configure these settings for the same traffic using both methods, then the FWSM uses the lower 
limit. For TCP sequence randomization, if it is disabled using either method, then the FWSM 
disables TCP sequence randomization.

•

Regular NAT:

hostname(config)# 

nat

 

(

real_interface

)

 

nat_id

 

real_ip

 [

mask

 [

dns

] [

outside

] 

[[

tcp

]

tcp_max_conns

 [

emb_limit

]] [

udp

 

udp_max_conns

] [

norandomseq

]]

The

 nat_id

 is an integer between 1 and 2147483647. The NAT ID must match a 

global

 command 

NAT ID. See the 

“Dynamic NAT and PAT Implementation” section on page 16-20

 for more 

information about how NAT IDs are used. 

0

 is reserved for identity NAT. See the 

“Configuring 

Identity NAT” section on page 16-34

 for more information about identity NAT.

See the preceding policy NAT command for information about other options.

Step 2

To identify the mapped address(es) to which you want to translate the real addresses when they exit a 
particular interface, enter the following command:

hostname(config)# 

global (

mapped_interface

)

 

nat_id

 {

mapped_ip

[

-

mapped_ip

]}

This NAT ID should match a 

nat 

command NAT ID. The matching 

nat 

command identifies the addresses 

that you want to translate when they exit this interface.

You can specify a single address (for PAT) or a range of addresses (for NAT). The range can go across 
subnet boundaries if desired. For example, you can specify the following “supernet”:

192.168.1.1-192.168.2.254

For example, to translate the 10.1.1.0/24 network on the inside interface, enter the following command:

hostname(config)# 

nat (inside) 1 10.1.1.0 255.255.255.0

hostname(config)# 

global (outside) 1 209.165.201.1-209.165.201.30

To identify a pool of addresses for dynamic NAT as well as a PAT address for when the NAT pool is 
exhausted, enter the following commands:

hostname(config)# 

nat (inside) 1 10.1.1.0 255.255.255.0

hostname(config)# 

global (outside) 1 209.165.201.5

hostname(config)# 

global (outside) 1 209.165.201.10-209.165.201.20

To translate the lower security DMZ network addresses so they appear to be on the same network as the 
inside network (10.1.1.0), for example, to simplify routing, enter the following commands:

hostname(config)# 

nat (dmz) 1 10.1.2.0 255.255.255.0 outside dns

hostname(config)# 

global (inside) 1 10.1.1.45

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов