manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 582 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 582

 

25-16

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 25      Monitoring the Firewall Services Module

  Configuring and Managing Syslog Messages

Including the Device ID in Syslog Messages

To configure the FWSM to include a device ID in non-EMBLEM-format syslog messages, enter the 
following command:

hostname(config)# 

logging device-id 

{

context-name 

| 

hostname

 | 

ipaddress

 

interface_name

 | 

string

 

text

}

You can specify only one type of device ID for the syslog messages.

The 

context-name

 keyword indicates that the name of the current context should be used as the device 

ID (applies to multiple context mode only). If you enable the logging device ID for the admin context in 
multiple context mode, messages that originate in the system execution space use a device ID of 

system

, 

and messages that originate in the admin context use the name of the admin context as the device ID.

The

 hostname

 keyword specifies that the hostname of the FWSM should be used as the device ID.

The 

ipaddress 

interface_name

 argument specifies that the IP address of the interface specified as 

interface_name

 should be used as the device ID. If you use the 

ipaddress 

keyword, the device ID 

becomes the specified FWSM interface IP address, regardless of the interface from which the syslog 
message is sent. This keyword provides a single, consistent device ID for all syslog messages that are 
sent from the device.

The 

string 

text

 argument specifies that the text string should be used as the device ID. The string can 

contain up to16 characters. You cannot use blank spaces or any of the following characters:

•

& (ampersand)

•

' (single quote)

•

" (double quote)

•

< (less than)

•

> (greater than)

•

? (question mark)

Note

If enabled, the device ID does not appear in EMBLEM-formatted syslog messages or SNMP traps.

The following example enables the logging device ID for the security appliance:

hostname(config)# 

logging device-id hostname

The following example enables the logging device ID for a security context on the security appliance:

hostname(config)# 

logging device-id context-name

Generating Syslog Messages in EMBLEM Format

To use the EMBLEM format for syslog messages sent to a syslog server over UDP, specify the 

format 

emblem

 option when you configure the syslog server as an output destination by entering the following 

command: 

hostname(config)# 

logging host

 

interface_name ip_address 

{

tcp

[/

port

] |

udp

[/

port

]]

 

[format emblem]

Where the 

interface_name

 and 

IP_address

 specify the syslog server to receive the syslog messages, 

tcp

[/

port

] and

udp

[/

port

] indicate the protocol and port that should be used, and 

format emblem

 

enables EMBLEM formatting for messages sent to the syslog server.

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов